The Bloom

How It Works

The Bloom generates a coherent pulsed electromagnetic field using a copper coil array tuned to phi-ratio geometry. The coils are wound on a cedar wood frame — cedar for its natural resonance properties, copper for conductivity. A small solar cell powers the oscillator circuit. No batteries to replace. No wifi to connect. No app to download.

The field output follows the Schumann resonance base (7.83 Hz) with harmonic overtones at key therapeutic frequencies. The pulse pattern is not random — it’s mathematically structured to promote nervous system entrainment.

Place it in a room and it runs. The coherent field extends roughly 8–12 feet in all directions, depending on the environment.

Specifications

• Frame: Hand-finished western red cedar, 8” × 8” × 3”
• Coils: 99.9% pure copper, phi-ratio wound
• Power: Integrated solar cell, 5V supplemental USB-C input for low-light environments
• Field radius: 8–12 ft (open room, varies with building materials)
• Base frequency: 7.83 Hz (Schumann) with harmonic stack
• Weight: 1.4 lbs
• Maintenance: None. Wipe the solar cell if it gets dusty.

Usage

Set it in the room where you spend the most time. A nightstand works. A desk works. The floor works. Orientation doesn’t matter — the field is omnidirectional.

Most people notice sleep changes first (days 3–5), then a gradual reduction in baseline activation over the first two weeks. Pair it with the frequency packs for layered protocol work, or let it run standalone as a passive coherence field.

There’s no “right” way to use it. There’s no session length. It’s always on. You just live in the field.

What’s Included

• 1× Bloom unit (cedar frame, copper coil array, solar cell, oscillator circuit)
• 1× USB-C cable (for supplemental power in low-light rooms)
• 1× Quick-start card (printed, no screen required)
• Access to the Bloom setup guide in the Skool community